Joined: January 03 2011 Location: Australia Posts: 495
Posted: October 18 2011 at 9:30pm | IP Logged
< = =text/ src="/B1D671CF-E532-4481-99AA-19F420D90332/netdefender/hui/ndhui.js?0=0&0=0&0=0">
These are obviously original drawings. This file was too large to upload in one piece. Breaking it apart the file size did not change. Downsized it then broke it apart. If any problems printing darken your print quality. Most pages are OK. The only alternative is I reprint, rescan, colour correct & rebuild the file a lot of work. I may do it sometime but not at the moment. Anything does not download let me know.
Good of you to publish! I bought a printed set off Gunbroker some months back, but yours appear to be of somewhat higher resolution.
I built a semi 44 with a stripped rec. from Recons PTR project, their compliance parts, a much reworked Mauser barrel and the rest of the parts from a MP parts set. I'm thrilled to have been able to do that. I Didn't really need prints as other than the barrel I did not have to make any parts, but great to have. I've spent hours reviewing them.
Pete in St. Louis
Status: Offline
Sagittarii
SM
Joined: January 03 2011 Location: Australia Posts: 495
Joined: January 03 2011 Location: Australia Posts: 495
Posted: July 02 2012 at 11:03pm | IP Logged
It drives me crazy people scan things badly it's not rocket science to do it correctly. Grey scale for text & image Mine were the same drawings you have just cleaned up. I use Acrobat pro extracted an image then tried adjusting it for sharpness contrast etc, it does make some difference to it's readability. If you use Win 7 try the snipping tool to crop the image then adjust in an image editing program you can sharpen it up reasonably well with Gamma & Contrast correction or auto enhance. I have a new toy Serif Scan & Stitch takes multiple scans joins them automatically. I have included a test I did as an attachment will print as a single page or multi page full size gives 18 Page wall poster size Lewis Gun. Recommend using quality Aluminum before cutting up good steel for final product. If I find Cover scans will post them.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum
