I have been reading through so many threads and the majority of them are dated pre 2009 with little information on what has been done to make these semi auto. Hours worth of speculation and questions to read through with not much useful information.
Anyway, I know you can now purchase these guns for about $3900 modified to semi and once upon a time the welding jig was available but very hard to find one.
To end all these random discussions I am hoping somebody out there with a semi-auto version can:
A) Make a print/drawing of all the modified parts,
B) Provide a receiver print for those of us welding the receiver back together. And...
C) If somebody has a jig I would gladly rent one from you with a damage deposit.
I can make CAD drawings and models to share if I get the right information.
Joined: January 10 2015 Posts: 3
Posted: March 11 2015 at 11:05pm | IP Logged
This is a start. Any idea on how to modify the trigger group and/or bolt to be semi-auto?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum