Any one have a Madsen M50 SMG parts kit or information? I just picked up a kit and was wondering if anyone has built one or thought about it. I will post some pics when I get a chance.
Joined: November 28 2004 Location: United States Posts: 9998
Posted: February 26 2009 at 1:46pm | IP Logged
Where did you get a kit?
I do not have much info except for a blueprint. I am planning on scratch building something that will look like the Madsen. I am going to increase the FCG area so I can use a AR15 or a AK FCG. My first task will be to see if I can form the receiver shell. I will be working on this in a couple weeks.
I look forward to seeing your pictures.
Joined: January 24 2008 Posts: 42
Posted: February 26 2009 at 1:58pm | IP Logged
I found it on gunbroker for all of $45 and that included 2 sten mags. the kit is a bit rusty with a pretty shout out bore bit it is complete except for the recoil spring and a couple of pins. Basically the entire center of the receiver is gone along with about half the magwell. I will gladly help with info. PM me with your email and I will send detailed pics.
Joined: May 03 2010 Posts: 5
Posted: May 05 2010 at 6:55am | IP Logged
i bouhgt a Madsen kit too, it is made as a deko-gun.
the Barrel is cut and welded, and the Bolt is cut under 45°.
I´m trying to rebuilt this parts.
Could you give me Information about your M50, do you
have drawings from the Bolt?
Greatings by Horus
Joined: May 18 2008 Posts: 197
Posted: May 05 2010 at 9:21am | IP Logged
You can find M50 and M56 Madsen SMG parts at www.thedealershowroom.com.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum