Joined: March 01 2008 Location: United States Posts: 1929
Posted: April 16 2009 at 10:17am | IP Logged
fjkernel,
WOW! Those are nifty. Thanks for the link. I am suprised they are considered 80%. Looks like the only holes missing are for the FCG. I do like the magwell being "cleaned" out... saves alot of time!
Status: Offline
voland
MSG
Joined: March 07 2007 Posts: 182
Posted: April 16 2009 at 1:39pm | IP Logged
That is very expensive.
Status: Offline
10thMtnGrndPounder
E-3
Joined: June 26 2009 Posts: 24
Posted: July 03 2009 at 1:02pm | IP Logged
Those are really nice but as bit pricey.
__________________ Best Wishes,,Rob
Status: Offline
midmichigun
CPT
Joined: March 01 2008 Location: United States Posts: 1929
Posted: July 03 2009 at 2:06pm | IP Logged
Guys,
I 2nd that... awesome but expensive. BUT most of the critical work is done. I bought my 80%'s they are just an outline with NO HOLES drilled, including the magwell and FCG area. So I don't know how the above rate as 80%.
However, considering all things... it would be a simple build if you have the $$ and want to do it. As a price check, how much are completed AR lowers currently running?
Status: Offline
10thMtnGrndPounder
E-3
Joined: June 26 2009 Posts: 24
Posted: July 03 2009 at 2:20pm | IP Logged
The Tannery Shop used to have good deals on 80% Lowers, and he used to have some that were even marked down awhile back. But that was before he was deployed to the middle east. Hes back now I believe. It may be worth a shot to check with him he also makes 80% 1911 frames as well. The one I ot from him just needed the rails cut, and holes drilled. the mag well was already done. And I paid 50.00 dollars for it. But this was some time ago and with the current political situation I'm not sure what they will priced at now.
__________________ Best Wishes,,Rob
Status: Offline
weaponeer
Admin Group
Joined: July 16 2005 Location: United States Posts: 25019
Posted: July 03 2009 at 2:21pm | IP Logged
midmichigun wrote:
Guys,
I 2nd that... awesome but expensive. BUT most of the critical work is done. I bought my 80%'s they are just an outline with NO HOLES drilled, including the magwell and FCG area. So I don't know how the above rate as 80%.
However, considering all things... it would be a simple build if you have the $$ and want to do it. As a price check, how much are completed AR lowers currently running?
I have several for a 4th of july sale at $105 + shipping to FFL (stripped)
__________________ Get your Weaponeer Wear and and Pro Second Amendment T-Shirts and Mugs here http://bit.ly/sfesDw
Status: Offline
tr6guns
Level 3 Site Sponsor
Joined: November 04 2006 Posts: 1438
Posted: July 03 2009 at 7:45pm | IP Logged
It looks like The Tannery Shop is no longer in the buisness of supplying any 80% anything....
__________________ I'm not so smart that it hurts me, but i'm a long way from being stupid
__________________ I'm not so smart that it hurts me, but i'm a long way from being stupid
Status: Offline
ne-vand
Private
Joined: September 04 2012 Location: United States Posts: 2
Posted: September 04 2012 at 4:36am | IP Logged
I've been
told that a good lower should either be forged or billet as cast lower
receivers are unreliable and weak, but I don't know who the best ar15
lower receiver manufacturers are. Does anyone have some recommendations?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum
